Specifications

DIAGNOSTX OVER-THE-AIR WAVEFORM ANALYZER

The DX-1000c, DiagnostX Over-the-Air Waveform Analyzer, identifies, verifies and analyzes the health and field performance of any portable or mobile trunked radio in a network 24 hours a day, 7 days a week without user interaction while the radios are operational and deployed in the field. The DiagnostX system consists of three subsystems of software running on specialized hardware: The DiagnostX Manager (DM) service, the DiagnostX Analyzer (DA) service, and the DiagnostX Viewer (DV) client interface. DiagnostX has the ability to retrieve historical radio performance analysis, to identify and track trends over the life of a radio, to validate the maintenance (preventative and otherwise) of the radio, and evaluate how the radio performs in the field.

DX-1000c Specifications

  • Monitors the Inbound Control Channel (Uplink),capturing and analyzing Motorola, EDACS and P25 Conventional and Trunked Portable and Mobile radios, over-the-air 24 hours a day, 7 days a week, with no user interaction while the radios are operational and deployed in the field.
  • Detects in Real Time Legacy Systems, RF (Frequency Error, Frequency Deviation, Max Frequency Deviation, Frequency Error Variation and Modulation Fidelity) and Emission Mask Conformance. P25 Systems, RF (Frequency Error, Symbol Frequency Error 600, Symbol Frequency Error 1800, Modulation Fidelity and Max Frequency Deviation) and Emission Mask Conformance. Both Legacy and P25 matrices continuously display the radio status by ID.
  • Installs at existing RF sites or Mobile Command Center: Connects to the sites RX Antenna multicoupler or to its own unfiltered antenna.
  • Multiple units can be networked to provide system wide coverage with real time field performance analysis of the radios stored in a single database.
  • Aids in the discovery of intermittent radio’s performance, evaluates the radio’s access to the system and resolves radio versus network issues.
  • Stand-alone, non-intrusive and has no impact on the radio network.
  • Portability allows it to be moved to mulitple sites if required for additional area coverage.
  • DiagnostX Viewer (DV), can be installed on any computer on the network and continuously produces reports based on user defined thresholds on all types of radio status while they are operating in the field:
    • Failed Evaluation
    • Passed Evaluation
    • Not Enough Transmissions to Evaluate
    • Transmissions Too Weak to Evaluate
    • Never Received
  • Power Requirement: Single AC supply with a rated voltage from 100 V to 240 V and rated frequency of 50 Hz to 60 Hz 1.0 AMP Nominal..
  • Rear Panel Antenna Connection: SMA-Type Plug.
  • Operating Temperature: 10 degrees to 50 degrees Celsius ambient.
  • Communications Link: RJ-45 Standard
  • Dimensions: Height ~7”, Width ~17”, Depth ~19”
  • Weight: Approximately ~44 pounds
  • Construction: Sheet Metal covered by flat panel black matte finish.
  • Rack Mounting: Standard 19” Rack